Mô tả
Carbon molecular sieves (CMS) and
Nitrogen gas generator KURASEP™
Nitrogen gas generator KURASEP™
A top-brand Pressure Swing Adsorption (PSA) system Nitrogen gas generator in Japan, KURASEP™ has a wide variety of sizes from small to large models.
Each model uses our Patented special operating system to save energy.
Cabinet Type (M-size)
Cabinet Type (S-size)
Mount Type
On-truck type
Return to top page
The principle of PSA system
CMS is a mainstream adsorbent for Pressure Swing Adsorption (PSA) system Nitrogen gas generator. There is a differential diffusion rate system based on the fact that the oxygen molecule is smaller than the nitrogen molecule.
CMS adsorbs oxygen gas, carbon dioxide gas, moisture and so on in compressed air in a short period of time and compressed nitrogen gas is available at the outlet. When the pressure decreases to the atmospheric or vacuum level, CMS which has adsorbed oxygen gas and others easily desorbs them and is regenerated.
When the above two operations are done alternately between
two adsorption columns, nitrogen gas can be available continuously from the air.
The Advantages of KURASEP™
- Allowing you to privately generate nitrogen gas with cost reduction
- Full automatic, labor saving operation
- Simplified system for easy maintenance
- Not subject to High Pressure Gas Safety Act
- Availability of a wide variety of models for many applications
(=availability of suitable one for your requirements) - Unique turndown system (optional) for saving even more energy.
- The on-truck type is a model enabling spot, emergency demands for nitrogen gas supply
Return to top page
Applications for KURASEP™
- Prevention of explosions and reactions in chemical plants
- Carrier gas for drying or recovering solvents
- Prevention of oxidation of chemicals
- Transfer gas for flammable or explosive items
- Atmospheric gas for melt spinning system for synthetic fibers
- Atmospheric gas for storing products
- Atmospheric gas for storing packaged foods
- Control atmospher into storage of fruits and vegetables
- Atmospheric gas for heat-treatment
- Atmospheric gas for rubber vulcanization
- Prevention of explosions of chemical tankers
- Supporting gas for laser processing
- Atmospheric gas for nitrogen type reflow furnace
Return to top page
KURASEP™ Flow Diagram
Kuraray’s Carbon Molecular Sieves (CMS)
Kuraray is one of the biggest Activated Carbon Manufacturers all over the world, which supplies various kind of Activated Carbon including CMS for Pressure Swing Adsorption (PSA) System for Nitrogen gas generator.
Also Kuraray is the top Nitrogen gas Generation PSA manufacturer in Japan using its own high performanced CMS and PSA engineering technology.
Normal Pellet carbon
CMS
Principles of Kuraray’s Carbon Molecular Sieves (CMS) for Nitrogen gas generator
General activated carbons can not separate Nitrogen from the air. But Kuraray’s CMS can make the separation by its High Adsorption Selectivity for each molecular.
Kuraray’s CMS is manufactured from Coconuts Shell and designed to have the most suitable pore for separating Nitrogen from Oxygen continuously by repeating the cycle of adsorption (Pressuring) and desorption (Depressurizing). Due to the high separation efficiency, Kuraray’s CMS can provide high nitrogen gas generation with low air consumption.
Features of Kuraray’s CMS
- High nitrogen gas generation due to the high speed of Oxygen adsorption
- High nitrogen purity due to the selective adsorption
- Low air consumption
Line Up of Kuraray’s Kuraray’s Carbon Molecular Sieves (CMS)
Kuraray has 2 series of CMS.
- [ H ] type
- High nigrogen gas generation type
Appropriate switching cycle is 60sec.
(Kuraray Standard)
- [ S ] type
- Low air consumption type
Appropriate switching cycle is 120sec.
(Kuraray Standard)
Basic property
| 1.5GN-H | 1.5GN-S | GN-UC-H | |
| Diameter | 1.4 -1.6 mm | 1.3 – 1.5 mm | |
| Bulk Density | 0.65 – 0.70 g/ml | 0.60 – 0.66 g/ml | |
| JIS Ball pan hardness | > 95% | > 92% | |
| Switching Cycle (Kuraray Standard) |
60 Sec | 120 Sec | 50 Sec |
