Product Advantages
Product Parameter
TPMT – TPMTD SERIES TECHNICAL SPECIFICATION | |||||||||
---|---|---|---|---|---|---|---|---|---|
Model | Power | Pressure | Capacity | Dimensions | Weight | Outlet Pipe | Noise Level | Tank Volume | |
KW | HP | bar | M3/min | (LxWxH) mm | Kg | Diameter | dB | L | |
TPMT7.5A | 5.5 | 7.5 | 8 | 0.80 | 1230x600x1530 | 300 | G3/4 | 65 | 300 |
10 | 0.70 | ||||||||
13 | 0.60 | ||||||||
TPMT10A | 7.5 | 10 | 8 | 1.10 | 1230x600x1530 | 300 | G3/4 | 65 | 300 |
10 | 1.00 | ||||||||
13 | 0.80 | ||||||||
TPMT15A | 11 | 15 | 8 | 1.60 | 1550x820x1780 | 350 | G3/4 | 65 | 300 |
10 | 1.45 | ||||||||
13 | 1.30 | ||||||||
TPMT20A | 15 | 20 | 8 | 2.30 | 1550x820x1780 | 350 | G3/4 | 65 | 300 |
10 | 2.00 | ||||||||
13 | 1.74 | ||||||||
15 | 1.50 | ||||||||
WITH AIR TANK, DRYER AND FILTER | |||||||||
TPMTD7.5A | 5.5 | 7.5 | 7 | 0.90 | 1725x660x1625 | 380 | G3/4 | 65 | 200/500 |
8 | 0.80 | ||||||||
10 | 0.70 | ||||||||
13 | 0.60 | ||||||||
TPMTD10A | 7.5 | 10 | 7 | 1.05 | 1725x660x1625 | 380 | G3/4 | 65 | 200/500 |
8 | 1.10 | ||||||||
10 | 1.00 | ||||||||
13 | 0.80 | ||||||||
TPMTD15A | 11 | 15 | 7 | 1.68 | 1880x820x1940 | 505 | G3/4 | 65 | 500 |
8 | 1.60 | ||||||||
10 | 1.45 | ||||||||
13 | 1.30 | ||||||||
TPMTD20A | 15 | 20 | 7 | 2.50 | 1880x820x1940 | 505 | G3/4 | 65 | 500 |
8 | 2.30 | ||||||||
10 | 2.00 | ||||||||
13 | 1.74 | ||||||||
15 | 1.50 | ||||||||
TPMTD30A | 22 | 30 | 7 | 3.52 | 2100x750x1950 | 650 | G1 | 75 | 600 |
8 | 3.36 | ||||||||
10 | 3.06 | ||||||||
13 | 2.80 | ||||||||
15 | 2.20 |
- The exhaust volume is measured under the rated exhaust pressure, according to the national standard GB3853 test (equivalent to ISO1217 appendix C).
- Recommend frequency 30%-100%.
- The above data is based on the standard grid- 380V/ 50HZ.
- Please make further inquiry for the non-standard specification type and machines which are used under high/low temperature, high humidity, dusty working environment.